How To Change From Wireless To Wired Connection Windows 7

So here's an interesting situation I ran into when using Windows 7 connected to both my Ethernet network and my wireless network at habitation: whenever I would transfer data between my NAS and my automobile, Windows 7 would tend to utilize the wireless network instead of the Ethernet connectedness! This was annoying because the speed of the transfers was much slower over the wireless connection for obvious reasons.

I was kind of surprised because I figured Windows would automatically figure out that the Ethernet connectedness was faster for this type of transfer and therefore switch over. However, that was not the case. Then so I couldn't help but try to figure out a fashion to force Windows to use the wired connection over the wireless one.

In this article, I'll show yous two methods that you tin can use to accomplish this. Annotation that it may be best to combine both methods to really make sure the proper connexion is being used. One method involves changing the network adapter bindings and the other method involves changing the metric on each network connection. By default, Windows uses the connectedness with the everyman metric value. For whatever reason though, the Ethernet connection may not cease up with a lower metric value, so you can manually change it.

Method 1 – Change Network Adapter Bindings

To modify the adapter bindings and order, start click on Showtime and then type in network connections. From the list, click on View network connections.

In the Network Connections dialog, y'all will demand to press the ALT key on your keyboard to get the carte bar to appear. Then click on Advanced and click on Avant-garde Settings.

Now you will encounter the list of network connections listed in the connections box.

In my example, you don't see the wireless network because this is running in a virtual car, notwithstanding, usually you would see Local Area Connection and Wireless Network Connection. You want to motion Local Expanse Connection to the top using the light-green arrows. This volition move the wired connection higher up in the society so that Windows 7 will access the network using Ethernet start, then Wireless. That's step one. The second method is too recommended to ensure Windows 7 is forcefully using the LAN connection.

Method 2 – Alter Network Metric Value

Yous tin read a little fleck near how metric values piece of work when accessing network resources here:

http://support.microsoft.com/?id=299540

In order to change the values, you need to go to Network Connections again, but this time correct-click on the network you want to alter the metric value for and choose Properties.

At present click on Internet Protocol Version four (TCP/IPv4) and click on Backdrop.

Then click on the Advanced button at the bottom right:

Lastly, on the IP Settings dialog, go ahead and uncheck the Automatic metric box and so blazon in a value yourself.

For the wired connexion, you want a lower value and it'south best to start with 10. At least that's the standard Microsoft uses. For the wireless connection, you can type in a higher value like 25 or 100. This will ensure that in the routing table, the "faster" network route is at present the wired connectedness instead of the wireless connectedness.

Like I said before, it'southward best to utilise both of these methods to fully ensure you lot are forcing Windows to use ane connexion over another. If you have any questions, feel free to mail a comment. Enjoy!

Exercise not share my Personal Information.